Tips to Help Your Furnace Run Smooth this Winter


Warm house With winter right around the corner, it’s time to properly prepare your home. You will need to make sure that your furnace is as energy-efficient as possible. Failure to have proper maintenance to your heating and cooling in Cartersville can result in your furnace running inefficiently and breaking down. Here are some tips to help your furnace run smooth this winter.


Replace the Air Filter

A filter safeguards your unit’s internal elements from particles and dust. If your filter is not changed at regular intervals then there’s a potential of dirt build-up, which can result in your furnace not functioning correctly. This can also cause reduce the quality of the air in your home. Typically, your filters should be replaced every three months.


Keep the Area of the Furnace Clean

If you have clutter around your furnace, it should be removed immediately since this is a fire hazard. You should sweep and vacuum the area regularly. When there is too much dust and dirt in the area surrounding the furnace, it can negatively affect its performance. Keeping your furnace well-maintained means that you will likely spend less money on energy and repair costs. The area of your furnace should not be used to store cardboard boxes or holiday decorations.


Get Your Furnace Inspected Yearly

Having an annual furnace inspection scheduled is critical to protecting your system against costly repairs. While a heating company in Cartersville is doing a tune-up, he will inspect your unit for any deteriorated components and other issues. Your furnace will be thoroughly cleaned. Efficient maintenance is important to keeping your system operating appropriately and safely.


Maintain a Good Humidity Level

The air inside of your home gets very dry during the winter months. The winter air tends to make you feel colder than you really are. When you utilize a humidifier to deliver the humidity level to approximately 40 percent, it will aid in transferring the heat better. Having more humidity is more efficient for wood floors and furniture. It can also prevent allergy attacks and asthma.


humidifier Install a Programmable Thermostat

You may want to consider having a programmable thermostat installed. This type of thermostat will operate more efficiently and assist you with saving on your energy costs. This equipment will automatically modify itself to pre-set temperatures you selected for various conditions. You can program the thermostat to raise the temperature at bedtime and decrease in temperature automatically when you’re not going to be home. A company that specializes in heating installation in Cartersville can assist you with this task.


Check the Fan Belt

The fan belt is one of the most critical operating elements of your furnace. You should inspect for signs of wear and also check the belt for tension. If you notice that the belt is loose, then it will take your furnace more time to heat your rooms. Additionally, you will end up using more gas and electricity. A heating contractor in Cartersville will ensure that your fan belt is running efficiently.


Check the Flue Pipe for Leaks

It’s important to check the flue pipe to make sure it’s venting properly. When there are holes in the flue pipe, it leaks combustion byproducts such as carbon monoxide. Check where the pipe and the furnace meet. Close up small holes with foil tape. If there are corroded flues, they will need to be replaced. If you’re unsure, it’s best to contact a heating service in Cartersville.


If you would like to learn more about helping your furnace to run smooth or to schedule an inspection, give the professionals at Shriver Mechanical a call.